MEF    Evolution End-Feed Mini Applicator

Evolution : a brand new mini applicator line offering the same quality level and reliability over the time of all Mecal’s products. The Evolution has been competitively priced, thanks to the specific production technologies adopted that have reduced ...

MES    Evolution Side-Feed Mini Applicator

Evolution : a brand new mini applicator line offering the same quality level and reliability over the time of all Mecal’s products. The Evolution has been competitively priced, thanks to the specific production technologies adopted that have reduced ...

MRF    Restyling End-feed Mini Applicator

Mini applicator for terminals linked « end to end », rolled over a reel, with thickness < 1.2mm, terminal pitch < 27mm, wire section between 0 and 10mm². Mechanical « end-feed » feeding system. Can be supplied either with a continuous or a four-pad r...

MRS    Restyling Left-side feed Mini Applicator

Mini Applicator for linked terminals with thickness < 1.2 mm, pitch < 27 mm, wire section between 0 and 10 mm². Mechanical « side-feed » feeding system for linked terminals on a reel to be unrolled left to right. Can be supplied either with a continu...

MRFP   Restyling Pneumatic end feed Mini Applicator

Mini applicator for terminals linked « end to end », rolled over a reel, with thickness < 1.2 mm, terminal pitch 27 – 35 mm, wire section between 0 and 10 mm². Pneumatic « end-feed » feeding system. Can be supplied either with a continuous or a four-...

MRSP   Restyling Pneumatic left-side feed Mini Applicator

Il miniapplicatore laterale sinistro pneumatico Mylar Tape serve per aggraffare i terminali preisolati su nastro, avvolti in bobina con svolgimento da sinistra verso destra, con cavi di diverse sezioni. L'alimentazione del terminale avviene mediante ...

FMP & LMP   Magnum Applicator

Applicator for terminals linked « end to end », with thickness between 1.2mm and 1.5mm, wire section up to 25mm². Pneumatic « end-feed » feeding system. Exclusively fitted with a continous regulating head having a resolution of 0.02 mm and a 2.7 mm range. Complete with a non-resettable, 7 digit cycle counter...

MSEP(F)   Pneumatic end feed Two-Post Die

Two-post crimping die for big terminals linked « end to end », rolled over a reel, with thickness above 1.5mm, wire section up to 75mm². Terminal pitch non binding. Continuous crimping height adjusting system. Pneumatic « end-feed » feeding system. All the wearing parts can be replaced without removing the applicator from the press...

MSEPS   Two-Post Die Pneumatic left side feed

Two-post crimping die for big linked terminals rolled over a reel to be unrolled « left to right », with material thickness above 1.5 mm., wire section up to 75 mm². Terminal pitch not binding.Continuous crimping height adjusting system. Pneumatic « side-feed » feeding system...

MSES    Two-Post Die Loose terminals

Two-post crimping die for big loose terminals with thickness above 1.5mm and wire section up to 75mm². Continuous crimping height adjusting system. The terminal is loaded by means of a manually operated slide, fitted with a sensor that allow the press to cycle only when the slide has reached its stroke’s end. ..